The E.M. Gauge Society

We are here to help your modelling

EMGS Logo
EMGS Logo

Reply To: Class 22 EM Gauge Conversion

› Members Forum › RTR Conversions › Locos › Class 22 EM Gauge Conversion › Reply To: Class 22 EM Gauge Conversion

January 17, 2020 at 10:34 pm #240935
Alan Rhodes
Participant

    I have converted two as Peter Hill described. I added several spacing washers to reduce side play. Setting the back to back was by trial and error as the Dapol flange is wider than normal in EM. B2B was set at 16.2mm. Both run fine through my A5 and B6 pointwork.