› Members Forum › Automation › Electronics › Electromechanical automation › Reply To: Electromechanical automation
July 14, 2023 at 4:26 pm
#245563
![](https://emgs.org/wp-content/uploads/2022/02/nick-ridgway_avatar-80x80.jpg)
Participant
Update: I decided I can do without the Herkat.
I’m now using a proprietary multifunction timer set to 36sec. The timer operates a relay that reversed the traction power polarity, and the motive unit stops on a diode-protected track section (I used the same technique on Little Dublow).
Track down; let testing commence!
-
This reply was modified 11 months, 2 weeks ago by
Nick Ridgway.
-
This reply was modified 11 months, 2 weeks ago by
Nick Ridgway.