Reply To: Hornby Class 31

Members Forum RTR Conversions Locos Hornby Class 31 Reply To: Hornby Class 31

#241071
Philip Eames
Participant

Hi Bill,
For EM gauge I seem to remember just pulling the wheels out and putting an appropriate shim/washer behind the wheel.

That’s the easy bit, the hard bit getting the keeper plate off the bottom of the bogie tower and not damaging those sanding pipes.

Regarding the body, the fan grille diameter is 2mm too big. Its worth using a Shawplan replacement EEDP31-00B which make an improvement with the looks.

http://www.shawplan.com/extreme_loco4mm.html

cheers
Phil